Maintenance Platforms for helicopters
Our individually decorated Maintenance or Working Platforms are made of aluminium and are therefore absolutely low-maintenance. This allows you to benefit from quick and trouble-free workflows. In our design your ease of use and your safety are the focus of our efforts. For this reason, our Maintenance platforms are all easy to handle and ergonomic to use. Thanks occurs and non-slip steps and platforms as well as ergonomic handrails and railings, we guarantee you and your staff also optimal safety when working at height. To ensure that the helicopters are the maintenance is optimally protected, all components of our platforms are coming into contact with helicopters are equipped with upholstered profiles.
The advantages at a glance
- Robust and corrosion-resistant
- Safe and stable
- Lightweight
- Easy to use
- Ergonomic operation
- maintenance
- indoor and outdoor use
- high safety standards
- Optional selectable equipment packages
- 1213 – Maintenance Platform height adjustable, suitable for all helicopter types
- 2017 – Lightweight Maintenance Platform – dismountable Version, suitable for all helicopter types
- 1215 – Maintenance Platform for helicopter with standard landing gear
- 1216 – Maintenance Platform for helicopter with high landing gear
- 2033 – Maintenance Platform for helicopter NH 90
- Platform for jet engine Maintenance and De-Icing of Aeroplanes
- 2093 – The highly compatible work platform for performing helicopter maintenance directly on the landing platform
- 2067 – Loadingramp for Airbus H145M helicopter into an A400M transport aircraft.
1213 – Maintenance Platform height adjustable, suitable for all helicopter types
LICO-GmbH – 1213 Maintenance Platform height adjustable
Description
Helicopter type
+ Airbus Helicopters EC135 / EC145 / H135 / H145 / BK 117 (all versions) with standard landing gear
+ If required, we quickly implement individual adaptions
The total height of the table can be adjusted from 1 300 mm to 1 900 mm. Thanks to the moveable stair part, the stair can be adjusted to suit the height. All parts facing to the helicopter are foamcoated to prevent damaging the airframe. A safety rail at the stairs and two sides of the platform fullfills all safety regulations while working.
Technical Data
Overall length: 4.98 m
Width: 1.50 m
Platform height min.: 1.3 m
Platform height max: 1.9 m
Total height max: 3.15 m
Weight: 350 kg
Load capacity: 300 kg
2017 – Lightweight Maintenance Platform – dismountable Version, suitable for all helicopter types
LICO GmbH – dismountable-maintenance-platform
Description
Helicopter type
+ Airbus Helicopters BK 117 / EC135 / EC145 / H135 / H145 (all versions) with standard landing gear
+ If required, we quickly implement individual adaptions
The lightweight version of our Maintenance Platform is now available as a dismountable version, which will make transportation much easier.
Technical Details
Lengh 3 113 mm
Width 1 200 mm
Height min. 1265 mm
incl. additional podium 1575 mm
Total height max. 2404 mm
Weight 115 kg
Loading capacity 250 kg
LICO GmbH – dismountable-maintenance-platform in dismatled state
Details disassembled state
Height: 820 mm
Width: 1200 mm
Length: 2800 mm
Weight: 130 kg
Installation requires: 1 h
1215 – Maintenance Platform for helicopter with standard landing gear
LICO GmbH – Maintenance Platform for Helicopters here with Airbus Helicopter H135
Description
Helicopter type
+ Airbus Helicopters BK 117 / EC135 / EC145 / H135 / H145 (all versions) with standard landing gear
+ If required, we quickly implement individual adaptions
The small platforms are very lightweight. A foldable small platform allows for an additional step-up of 310 mm. All parts facing the helicopter are foamcoated to prevent damge to the airframe. A safety rail at the stairs and two sides of the platform fullfills all safety regulations while working.
Technical Data
Overall length: 3.11 m
Width: 1.20 m
Platform height min: 1.26 m
Platform height max: 1.56 m
Total height max: 2,4 m
Weight: 70 kg
Load capacity: 250 kg
1216 – Maintenance Platform for helicopter with high landing gear
Lico GmbH – 1216 – Maintenance Platform for helicopter with high landing gear
Description
Helicopter type
+ Airbus Helicopters BK 117 / EC135 / EC145 / H135 / H145 (all versions) with standard landing gear
+ If required, we quickly implement individual adaptions
The small platforms are very lightweight. A foldable small platform allows an additional stepup of 310 mm. All parts facing the helicopter are foamcoated to prevent damage the airframe. A safety rail at the stairs and two sides of the platform fullfills all safety regulations while working
Technical Data
Overall length: 3.6 m
Width: 1.2 m
Platform height min: 1.56 m
Platform height max: 1,86 m
Total height max: 2,70 m
Weight: 140 kg
Load capacity: 250 kg
2033 – Maintenance Platform for helicopter NH 90
LICO GmbH – 2033 – Maintenance Platform for helicopter NH 90
Description
Helicopter type
+ NH 90
The platform has been designed for installation at the side of the helicopter. In order to reach this position,the platform can be moved in longitudinal and transverse direction For safe ongitudinal driving, two steering wheels with direction lock can be locked in place. The Platform is provided with a. support tabe for manuals and tools. One Board is equipped with an additinal small parts containers.
Technical Data
Overall length: 4.66 m
Width: 1.36 m
Platform height: 2.2 m
Overall Height: 3.33 m
Weight: 260 kg
Load capacity: 300 kg
Platform for jet engine Maintenance and De-Icing of Aeroplanes
LICO GmbH – working platform for aircraft de-icing of engines.
The Maintenance Platform is an ascension tool for general maintenance, De-Icing of aircraft engines. But also for the hands-on check, the platform can be used. The Maintenance Platform is just like a normal car trailer coupled with the help of the support wheel and towed to the site. There the Maintenance Platform is disconnected, and manually pushed to the aircraft. The guardrail on the platform can be implemented so that always one side for access to the engine is open.
Technical Data
Length: 3940 mm
Width: 1.400 mm
Height Platform: 2.000.mm
Total height 3.100.mm
Weight: 190 kg
Capacity: 2000 N
2 people support load 700 N
towing speed: max 30 km / h
2063 – Platform for Fuel Test Area for Airbus Helicopters
2063 – special production a descending stage for the Fuel-Test-area at the company Airbus Helicopters
Description
A specially designed platform for our customer Airbus Helicopters
„ LICO completed the ascending platform project for the fuel test area for its
customer Airbus Helicopters. An access pedestal was developed and manufactured
according to customer-specific requirements. LICO met the requirement
to design, produce and deliver on time an ascending platform that was
tailored to the customer‘s detailed needs to our full satisfaction. Each step in
the process was accompanied by open and customer-focused communication.
The result can be called „thought out in detail“ and „professionally produced.“
Nils DIPPON
Vehicle Test & Integration Germany
ETXSLG
The highly compatible work platform for performing helicopter maintenance directly on the landing platform, Version 2093.00.00.00
Professional and flexible maintenance with high-performance Lico work platforms
- Maintenance platforms for helicopters, incl. H135/H145, etc.
- Compatible work platforms for landing platforms – individually adapted platform for safe and convenient access to helicopters on the landing platform
- Extra-large platform (1.3 x 3m) and recessed floor supports also available for helicopter applications without landing platforms Designed to accommodate up to 4 persons working on the platform simultaneously
- Thanks to its aluminum construction, the platform is lightweight and easy to manoeuver, yet also extremely stable and low-maintenance thanks to numerous welded connections.
LICO – GmbH – Working Platform
LICO – GmbH – Working Platform
LICO Stahl- und Kunststofftechnik GmbH, the specialist for helicopter ground support equipment, supplied the Saxony police helicopter squadron with two custom-produced work platforms for H135 helicopters. For this application, helicopter maintenance and repair work has to be carried out directly on the landing platform. So it was necessary to design a custom work platform to meet the customer’s specific requirements. The newly developed work platform enables maintenance and repair work to be performed directly on the platform by the maintenance crew at Dresden Airport. The work platform offers the advantage of being able to accommodate helicopter positioning variance of +/- 0.5 meters. Of course, no modification is necessary to use the work platform directly adjacent to the helicopter without the landing platform.
The work stages were specially designed by LICO for work on H135 and H145 helicopters. To ensure optimal protection of the helicopter during maintenance, all work platform components that can come into contact with the helicopter are equipped with special padding. Streamlined work processes are ensured thanks to a separate left and right work platform for the helicopter, enabling work on both sides simultaneously. The work platforms are also equipped with height-adjustable platforms operated by ergonomic handles. This allows for working height adjustment of 1.2 to 2 meters for optimal accommodation of staff and maintenance/repair work. Minimal crank force is required. Moreover, the platforms have storage shelves for tools, as well as removable railings.
The work platforms are equipped with direction adjusting means as well as 4 swivel casters, of which 2 with brakes. This allows for accurate and convenient platform positioning, as well as relocation. Two supports on the walk-up side ensure platform safety at all times. Checker plates, anti-slip steps (anti-slip class R10) along with ergonomic handrails and railings ensure safe mounting and demounting. The work platforms are welded, aluminum constructions, which makes them absolutely weather resistant and low-maintenance. It also means they are lightweight and offer outstanding durability and stability. LICO work platforms meet the most stringent occupational safety standards in accordance with DIN ISO 14122-2/-3.
The platform is compatible with landing platforms from various manufacturers, such as Wackerbauer, Heliwagon, Johne Service (see images from Johne-Service). Modification to suit other models is easily possible.
LICO Stahl- und Kunststofftechnik GmbH has been designing and manufacturing ground support equipment for helicopters for over 35 years. Aside from maintenance and repair platforms for helicopters, LICO also offers transport wheels and tow bars as standard portfolio products. Individually-tailored solutions for specific requirements made to order.
We look forward to serving you.
Divisions
