Gases Industry – Cylinder Inverter / Cylinder Roller
During the last few years LICO GmbH developed several custom machines for the gas-producing industry. These are machines that allow for maintenance of gas cylinders. In addition, we also offer systems for homogenising gas mixtures. These machines are fully automatic and are already exported across the EU.
- 9745 / 1225 – Cylinder Inverter / Cylinder Roller – Gas Homogenisation Machine for single bottles and bottle rack
- 9202 – Cylinder Inverter / Cylinder Roller
- 2043 – Cylinder Valving Equipment Machine for insertion and removal
9745 / 1225 – Cylinder Inverter / Cylinder Roller – Gas Homogenisation Machine for single bottles and bottle rack
9745 – FULLY AUTOMATED
1225 – SEMI AUTOMATED
Gas Mixtures in a 12-piece cylinder bundle, as well as loose cylinders on a transport pallet, can be homogenised with the gas mixing device. The device is adjusted for the specific version of the bundle stand and Bottle rack provided by the customer. The machine is surrounded by a safety fence with electrically controlled safety door.
The standard version of the machine is designed for pallets with floor dimensions
980 mm x 800 mm. For another dimensions the basic design must be changed
a little bit.
length 3590 mm
Width 2410 mm
Height 2660 mm
Total weight 2120 kg
Weight 20 000 N
9202 – Cylinder Inverter / Cylinder Roller
Gas mixtures with 4, 5 or 6 steel cylinders in the sizes Ø 100 mm – 250 mm and lengths 900 mm – 1,850 mm can be homogenised with the mixing device for gases by rotating them along the longitudinal axis of the cylinders.
In the version for potentially explosive rooms the switch box is attached outside the explosion risk (Ex) area. Drives, limit switches and operating console are equipped for explosion protection class Eexde II T4.
Length 3 590 mm
Width 2 410 mm
Height 2 660 mm
Total weight 2 120 kg
Weight 20 000 N
2043 – Cylinder Valving Equipment Machine for insertion and removal
MACHINE TO REMOVE AND INSERT VALVES OF STEEL CYLINDER
– Adjustable torque moments
– Diameter of cylinders 110 mm – 300 mm
– For different nuts available
– Lifting – unit for cylinders
– Construction normal and EX
The system consists of the following components:
– machine frame
– drive unit
– clamping device
– machine control system